Traffic-Class - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

traffic-class

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
In Classifier Group Configuration mode:
[ no ] [ suspend ] traffic-class trafficClassName1
In Global Configuration and Traffic Class Group Configuration modes:
[ no ] traffic-class trafficClassName2
Command introduced before JunosE Release 7.1.0.
In Classifier Group Configuration mode, specifies a traffic class in a policy list for policy
management. The no version removes a traffic class from a policy list; the suspend
version temporarily suspends the policy rule; the no suspend version resumes application
of a suspended rule.
NOTE: This command replaces the Policy List Configuration version of the
traffic-class command, which may be removed completely in a future release.
In Global Configuration mode, configures a traffic class in the E Series router. In Traffic
Class Group Configuration mode, specifies a traffic class that belongs to the traffic-class
group. The no version deletes the traffic class.
trafficClassName1—Name of the traffic class; up to 40 characters
trafficClassName2—Name of the traffic class; up to 31 characters
Classifier Group Configuration, Global Configuration, Traffic Class Group Configuration
Configuring Traffic Classes That Define Service Levels
Configuring Traffic-Class Groups That Define Service Levels
Policy Rule Precedence
Chapter 8: T Commands
1331