Test Bgp Ipv6 Neighbor - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

test bgp ipv6 neighbor

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
test bgp ipv6
[ unicast | multicast | vpnv6 all | vpnv6 vrf vrfName | route-target signaling ]
neighbor { ipAddress | ipv6Address | peerGroupName }
{ advertised-routes | routes } [ ipv6Prefix ]
[ distribute-list accessListName |
filter-list asPathAccessListName [ weight weightValue ] |
prefix-list prefixListName | prefix-tree prefixTreeName | route-map mapTag ]*
[ fields { fieldOptions } ] [ filter ]
Command introduced before JunosE Release 7.1.0.
route-target signaling keywords added in JunosE Release 8.2.0.
Tests BGP policy for IPv6 BGP routes advertised to or received from peers without
implementing the policy. There is no no version.
unicast—Specifies the IPv6 unicast address family and routing table; the default option
multicast—Specifies the IPv6 multicast address family and routing table
vpnv6 all—Specifies the VPN-IPv6 address family and all IPv6 VPN routing and
forwarding instances
vpn6 vrf vrfName—Specifies the VPN-IPv6 address family and only the IPv6 VPN
routing and forwarding instance with the name vrfName
route-target signaling—Specifies the route-target address family
ipAddress—IP address of BGP neighbor
ipv6Address—IPv6 address of BGP neighbor
peerGroupName—Name of a BGP peer group
advertised-routes—Tests only the outgoing advertisements to the specified BGP
neighbor or peer group
routes—Tests only the incoming routes originating from the specified BGP neighbor or
peer group
ipv6Prefix—IPv6 prefix for which you want information displayed
accessListName—Name of the access list to use as the distribute list to filter routes by
prefix; string of up to 32 alphanumeric characters
asPathAccessListName—Name of a single AS path access list used to filter routes by
AS path; string of up to 32 characters
weightValue—Weight assigned to incoming routes matched by the AS path access list;
integer in the range 0–4294967295
prefixListName—Name of a BGP prefix list used to filter routes by prefix
prefixTreeName—Name of a BGP prefix tree used to filter routes by prefix
Chapter 8: T Commands
1299