Show Vpls Connections - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

show vpls connections

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1176
show vpls connections [ state up | state down | details | bridge-group vplsName |
remote-site siteId ]* [ filter ]
Command introduced in JunosE Release 7.2.0.
Displays connection information for a specified VPLS instance configured on the router,
or for all VPLS instances configured on the router. You can display detailed configuration
and status information for one or for all VPLS connections on the router, or you can
display information only for VPLS connections with a specified operational state (up or
down) or remote site ID.
state up—Displays information only for operational (up) VPLS connections
state down—Displays information only for nonoperational (down) VPLS connections
details—Displays detailed configuration and status information for VPLS connections
vplsName—Name of a specific VPLS instance created with the bridge vpls
transport-virtual-router command; if you omit the bridge-group keyword and VPLS
instance name, the command displays connection information for all VPLS instances
configured on the router
siteId—Integer, in the range 1–65535, that uniquely identifies the remote site for a VPLS
instance; the site ID is configured with the bridge vpls site-name site-id command
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
filter—See Filtering show Commands on page 4
Privileged Exec
Monitoring VPLS-Specific Settings in the JunosE BGP and MPLS Configuration Guide
Copyright © 2010, Juniper Networks, Inc.