Snmp-Server Interfaces Rfc1213 - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

snmp-server interfaces rfc1213

Syntax
Release Information
Description
Options
Mode
1200
snmp-server interfaces rfc1213 [ maxIfIndex ] [ maxIfNumber ]
[ no ] snmp-server interfaces rfc1213
Command introduced before JunosE Release 7.1.0.
Specifies that the router bases numbering in the IfTable on RFC 1213. The no version
restores the default value, which is to use RFC 1573 style numbering in interface tables.
CAUTION: Reducing the value of the maxIfIndex, the maxIfNumber, or both,
causes the router to automatically reboot to factory default settings.
The router does not reboot to factory defaults if you:
Increase the values of maxIfIndex and/or maxIfNumber.
Issue a no version of the snmp-server interfaces rfc1213 command when the router is
already set up for RFC 1573 style numbering.
Enter the snmp-server interfaces rfc1213 command with the same options multiple
times.
maxIfIndex—Maximum value of index numbers in the interface tables, in the range
100–65535; default value is 65535
maxIfNumber—Maximum number of interfaces in each interface table, in the range
100–65535; default value is 65535
Global Configuration
Copyright © 2010, Juniper Networks, Inc.