Tunnel Lifetime - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel lifetime

Syntax
Release Information
Description
Options
Mode
1350
tunnel lifetime { kilobytes kbytes | seconds secs | seconds secs kilobytes kbytes }
no tunnel lifetime { seconds | kilobytes }
Command introduced before JunosE Release 7.1.0.
Sets the lifetime of IPSec SAs running on this tunnel. You can specify the lifetime in
seconds and/or volume of traffic. Before either limit is reached, the SA is renegotiated,
ensuring that the tunnel does not go down before the renegotiation is finished. The no
version sets the lifetime to the default lifetime of 28800 seconds and an unlimited
volume.
secs—Number of seconds security SAs on this tunnel live before expiring, in the range
1800–864000
kbytes—Volume of traffic in kilobytes that can pass between the tunnel endpoints
using a given SA before the SA expires, in the range 102400–4294967295
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.