Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
telnet
Syntax
Release Information
Description
Options
1290
telnet ipAddress | hostname [ vrf vrfName ] [ ipPortNumber | ipPortType ]
[ source-interface interfaceType interfaceSpecifier | noecho | line | debug |
verbose ]*
Command introduced before JunosE Release 7.1.0.
Enables connections to remote routers via the embedded Telnet client. There is no no
version.
ipAddress—IP address of the remote router
hostname—Name of the remote router
vrfName—Name of the VRF to which the command applies; string of 1–32 alphanumeric
characters
ipPortNumber—Number of the port for the connection to the remote router, in the range
0–65535; default value is port number 23, the Telnet port. For more information about
port numbers and associated processes, see www.iana.org.
ipPortType—Name of a well-known port, as follows:
bgp—Border Gateway Protocol (port 179)
chargen—Character generator (port 19)
cmd—Remote commands (port 514)
daytime—Daytime (port 13)
discard—Discard (port 9)
domain—Domain Name Service (port 53)
echo—Echo (port 7)
exec —Exec (port 512)
finger—Finger (port 79)
ftp—File Transfer Protocol (port 21)
ftp-data—FTP data connections (port 20)
gopher—Gopher (port 70)
hostname—NIC hostname server (port 101)
ident—Ident Protocol (port 113)
irc—Internet Relay Chat (port 194)
klogin—Kerberos login (port 543)
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
