terminal data-character-bits
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
terminal data-character-bits { 7 | 8 }
Command introduced before JunosE Release 7.1.0.
Sets the number of data bits available for characters for the current session on the
terminal screen. There is no no version.
7—Seven data bits per character; this setting supports only characters in the standard
ASCII set
8—Eight data bits per character; this is the default setting, which supports the full set
of 8-bit international characters
Privileged Exec, User Exec
Chapter 8: T Commands
1293