Show Vlan Profile - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show vlan profile

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show vlan [ bulk-config ] profile [ { interfaceType } interfaceSpecifier ] override
[ filter ]
Command introduced in JunosE Release 7.1.0.
bulk-config keyword and interfaceType variable added in JunosE Release 7.3.0.
Displays information about overriding profile assignments for the bulk-configured VLAN
ranges on a VLAN subinterface. Information about base profile assignments is not
displayed. You can display information for all VLAN ranges on the router, for all VLAN
ranges on a particular VLAN subinterface, or for the VLAN range associated with a
particular bulk configuration name.
bulk-config—Displays information about bulk-configured ranges
interfaceType—One of the following interface types listed in "Interface Types and
Specifiers" on page 5:
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
1173