Tunnel Signaling - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tunnel signaling

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
tunnel signaling { isakmp | manual }
no tunnel signaling
Command introduced before JunosE Release 7.1.0.
Sets the signaling protocol used to negotiate security parameters and keys. The no version
restores the default, isakmp.
isakmp—Uses ISAKMP/IKE to negotiate parameters
manual—Specifies that security parameters are configured manually
Interface Configuration
Chapter 8: T Commands
1375