Snmp-Server View - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

snmp-server view

Syntax
Release Information
Description
Options
Mode
1212
snmp-server view viewName oidTree [ viewType ] [ storageType ]
no snmp-server view viewName oid-tree
Command introduced in JunosE Release 7.1.0.
Dynamically configures an SNMP server view. The no version removes the dynamically
created view.
NOTE: You must access the CLI at privilege level 15 to view or use this
command.
viewName—SNMP dynamic view name
oidTree—Name of the object identifier (OID) tree
viewType—OID type
included—OID is included
excluded—OID is excluded
storageType—Storage type
volatile—Loses contents on warm or cold start
nonvolatile—Preserves contents across warm or cold start. This is the default.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.