Timing Select - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

timing select

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
timing select selector
Command introduced before JunosE Release 7.1.0.
Configures the preferred timing selector. There is no no version.
selector—Timing selector; one of the following:
primary—Highest-priority preferred selection
secondary—Middle-priority preferred selection
tertiary—Lowest-priority preferred selection
Global Configuration
Chapter 8: T Commands
1315