Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 1237

Copyright © 2010, Juniper Networks, Inc.
dvmrp—DVMRP traps
dvmrpUni—E Series router proprietary DVMRP traps
environment—Power/temperature/fan traps
fileXfer—File transfer status change traps
inventory—Router inventory/status traps
ip—Internet Protocol traps
ldp—LDP traps
link—SNMP linkUp/linkDown traps
log—System log capacity traps
mobileIpv4—Mobile IPv4 traps
mplste—Mplste traps
mrouter—Mrouter traps
packetMirror—Secure packet mirroring traps; visible only if packet mirroring is enabled
ospf—OSPF traps
ping—Ping operation traps (in disman remops MIB)
radius—RADIUS traps
snmp—SNMP coldstart, warmstart, link, authenticationFailure traps
traceroute—Traceroute operation traps (in disman remops MIB)
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
trapFilter—Minimum severity level for filtering traps sent to this host
alert—Severity level 1
critical—Severity level 2
debug—Severity level 7
emergency—Severity level 0
error—Severity level 3
informational—Severity level 6
notice—Severity level 5
warning—Severity level 4
Chapter 7: S Commands
1195