Sscc Enable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

sscc enable

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
sscc enable cops-pr
no sscc enable
Command introduced before JunosE Release 7.1.0.
Enables the SRC client's COPS support, which is used when the SRC service application
engine communicates with a policy decision point, such as the SRC application. The no
version disables COPS support.
cops-pr—Enables COPS-policy provisioning operation.
Global Configuration
Chapter 7: S Commands
1223