Suspicious-Control-Flow-Detection Protocol Backoff-Time - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

suspicious-control-flow-detection protocol backoff-time

Syntax
Release Information
Description
Options
Mode
1246
suspicious-control-flow-detection protocol protocolValue backoff-time backoffTimeValue
no suspicious-control-flow-detection protocol protocolValue backoff-time
Command introduced in JunosE Release 7.3.0.
Sets the backoff expiration time when the flow is no longer considered suspicious for a
specific protocol. The no version restores the default value of 300 seconds for a protocol.
protocolValue—Name of the protocol
backoffTimeValue—Period of time in seconds; 0 or a number in the range 10–1000; a
value of zero means that a suspicious flow does not change to the nonsuspicious state
because of a timeout; if the low threshold value is zero and the backoff time is zero,
the flow is only considered no longer suspicious if the rate (in packets per second)
goes to zero
Global Configuration
Copyright © 2010, Juniper Networks, Inc.