Tcp Mss - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tcp mss

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ ip ] tcp mss [ vrf vrfName ] mssValue
no [ ip ] tcp mss [ vrf vrfName ]
Command introduced before JunosE Release 7.1.0.
ip keyword made optional in JunosE Release 7.2.0.
Specifies the MSS value for TCP to use. The no version removes the MSS value, and the
router uses the advertised MSS derived from the MTU of the output interface.
NOTE: The MSS value is equal to the MTU value minus the IP or IPv6 and
TCP headers. This means that the MSS value is generally 40 bytes less than
the MTU (for IPv4) and 60 bytes less than the MTU (for IPv6.
ip—Optional keyword for use with older scripts
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
mssValue—Value for MSS that you want TCP to use; in the range 536–65495 bytes
for IPv4 and 1280–65495 bytes for IPv6
Interface Configuration
Chapter 8: T Commands
1281