Tunnel Session-Key-Inbound - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tunnel session-key-inbound

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
tunnel session-key-inbound inSaAlgorithms { encryptKey authKey | authKey }
no tunnel session-key-inbound
Command introduced before JunosE Release 7.1.0.
Specifies the encryption and authentication algorithm set and session keys for manual
inbound SAs. The no version removes the keys.
inSAalgorithms—Algorithms to use for manual inbound SAs; use the online Help to see
a list of available algorithms
encryptKey—Encryption key; string of hexadecimal characters; length varies according
to algorithm
DES—16 hexadecimal characters for the 8-byte key
3DES—48 hexadecimal characters for the 24-byte key
MD5—32 hexadecimal characters for the 16-byte key
SHA—40 hexadecimal characters for the 20-byte key
authKey—Authentication key; string of up to 48 characters
Interface Configuration
Chapter 8: T Commands
1373