Suppress-Default - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

suppress-default

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] suppress-default
Command introduced before JunosE Release 7.1.0.
Suppresses an IS-IS level 1-2 router from indicating that it can reach destinations outside
the area, thus preventing level 1 routers from installing a default route to the level 1-2
router. The no version disables suppression of default routes.
Router Configuration
Chapter 7: S Commands
1243