Show Vlan Subinterface - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

Software for e series broadband services routers command reference n to z
Table of Contents

Advertisement

JunosE 11.3.x Command Reference Guide N to Z

show vlan subinterface

Syntax
Release Information
Description
Options
1174
show vlan subinterface [ interfaceType interfaceSpecifier ] [ mac-address ] [ filter ]
To display summary information:
show vlan subinterface summary
To display by VLAN ID or S-VLAN ID:
show vlan subinterface { svlan s-vlanIdValue | vlan } { vlanIdValue | any }
[ mac-address ] [ filter ]
To display VLAN subinterfaces that are created based on agent-circuit-identifier
information:
show vlan subinterface [ interfaceType interfaceSpecifier | svlan s-vlanIdValue ]
agent-circuit-identifier [ filter ]
Command introduced before JunosE Release 7.1.0.
s-vlan keyword and s-vlanIdValue variable added in JunosE Release 7.1.0.
vlan keyword and vlanIdValue variable added in JunosE Release 7.1.0.
any and mac-address keywords added in JunosE Release 7.1.0.
agent-circuit-identifier keyword added in JunosE Release 7.3.0.
Displays configuration and status information for a specified VLAN subinterface or for
all VLAN subinterfaces configured on the router. Alternatively, you can use the summary
keyword to display only brief summary information for all VLAN interfaces. You can also
display information about the VLAN IDs or S-VLAN IDs for the specified VLAN subinterface.
interfaceType—One of the following interface types listed in "Interface Types and
Specifiers" on page 5:
atm
fastEthernet
gigabitEthernet
lag
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
mac-address—Displays VLAN subinterfaces configured with unique MAC addresses
filter—See Filtering show Commands on page 4
summary—Displays only the total number of VLAN subinterfaces and the total number
of VLAN major interfaces configured on the router
s-vlanIdValue—S-VLAN ID number in the range 0–4095
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.3

Table of Contents