Show Terminate-Code - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show terminate-code

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show terminate-code { application [ terminateReason | translationApplication ] |
translationApplication [ terminateCode ] } [ filter ]
Command introduced in JunosE Release 7.3.0.
Displays information about the current mappings of application terminate reasons to
standards-based terminate codes.
application— Application; AAA, L2TP, PPP, or RADIUS client
terminateReason—Reason that the subscriber's session was terminated
translationApplication—Application whose terminate code is used for the mapping; for
example, RADIUS
terminateCode—Code used by the translation application to identify the terminate
reason; for example, a RADIUS Acct-Terminate-Cause code
filter—See Filtering show Commands on page 4
Privileged Exec
Chapter 7: S Commands
1161