Snmp Trap Frame-Relay Link-Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

snmp trap frame-relay link-status

Syntax
Release Information
Description
Mode
1214
[ no ] snmp trap frame-relay link-status
Command introduced before JunosE Release 7.1.0.
Enables processing of SNMP link status information about a Frame Relay major interface
(if issued from Interface Configuration mode) or subinterface (if issued from Subinterface
Configuration mode). The no version disables the processing of SNMP link status
information.
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.