Table of Contents
Advertisement
t1 timeslots
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
t1 channel/subchannel timeslots range [ speed { 56 | 64 } ]
no t1 subchannel
Command introduced before JunosE Release 7.1.0.
Configures the timeslots and data rate used on each T1 channel on the CT3 interface.
The no version deletes the fractional T1 circuit.
channel—T1 channel number in the range 1–28
subchannel—Subchannel specifies the logical subchannel on a T1 in the range 1–24
range—Specifies the timeslot assigned to the T1 channel, in the range 1–24. A dash
represents a range of timeslots, and a comma separates timeslots. For example, 1-10,
15-18 assigns timeslots 1 through 10 and 15 through 18.
speed—Specifies the data rate for the T1 channel, either 56 Kbps or 64 Kbps; default
value is 64 Kbps
Controller Configuration
Chapter 8: T Commands
1271
Advertisement
Table of Contents
