Show Tcp Statistics - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

show tcp statistics

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
show [ ip | ipv6 ] tcp statistics [ vrf vrfName ] [ brief | detailed | diagnostic ]
[ delta ] [ local-address localAddress ] [ local-port localPort ]
[ remote-address remoteAddress ] [ remote-port remotePort ] [ filter ]
Command introduced before JunosE Release 7.1.0.
ip keyword made optional in JunosE Release 7.2.0.
ipv6 keyword added in JunosE Release 7.2.0.
Displays all TCP statistics or only IPv4 or IPv6 TCP statistics.
NOTE: Order is important when you enter options for this command. Even
though you can skip options, you cannot enter options out of sequence.
ip—Displays only IPv4 TCP statistics
ipv6—Displays only IPv6 TCP statistics
vrfName—Name of the VRF
brief—Displays a brief summary of each TCP connection
detailed—Displays detailed statistics for each TCP connection
diagnostic—Displays diagnostic information collected on all TCP connections, including
per-connection logging information
delta—Displays baselined statistics
localAddress—Local IPv4 or IPv6 address for which session statistics are displayed
localPort—Local port number for which session statistics are displayed
remoteAddress—Remote IP v4 or IPv6 address for which session statistics are displayed
remotePort—Remote port number for which session statistics are displayed
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Chapter 7: S Commands
1157