Suspicious-Control-Flow-Detection Protocol Low-Threshold - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

suspicious-control-flow-detection protocol low-threshold

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
suspicious-control-flow-detection protocol protocolValue
low-threshold lowThresholdValue
no suspicious-control-flow-detection protocol protocolValue low-threshold
Command introduced in JunosE Release 7.3.0.
Sets the low threshold rate at which a suspicious flow becomes no longer suspicious for
a specific protocol. The no version restores the default for a protocol, which is a
protocol-dependent non-zero numeric value.
protocolValue—Name of the protocol
lowThresholdValue—Threshold value in packets per second; 0 or a number in the range
1–32767; a value of zero means that a suspicious flow cannot change to the
nonsuspicious state via a threshold; a flow can only become nonsuspicious via a backoff
time; if the low threshold value is zero and the backoff time is zero, the flow can only
be considered nonsuspicious if the rate (in packets per second) goes to zero
Global Configuration
Chapter 7: S Commands
1247