Snmp-Server Interfaces Compress - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

snmp-server interfaces compress

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] snmp-server interfaces compress [ interfaceLayer ]* table-type TableType
Command introduced before JunosE Release 7.1.0.
The table-type keyword added in JunosE Release 10.2.0.
Removes a set of sublayers from the ifTable, the ifStackTable, and the ipAddrTable. You
can enter this command multiple times to remove multiple interfaces. By specifying a
table type, you can restrict interface compression only to the specified table types in the
SNMP interface configuration. The no version negates the compression.
interfaceLayer—Interface layer that you want to remove from the ifTable, the
ifStackTable, and the ipAddrTable. If you do not specify an interface layer, the router
removes the following interface layers:
ip
ppp
ethernetSubinterface
hdlc
pppoeInterface
ipLoopback
ipVirtual
pppLinkInterface
slepInterface/ciscoHdlc
TableType—Table type on the SNMP interface configuration to which you want to limit
the interface compression. The supported table types are interface-table and
interface-stack-table.
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Chapter 7: S Commands
1197