Tunnel Group-Address-Pool - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel group-address-pool

Syntax
Release Information
Description
Options
Mode
1348
tunnel group-address-pool [ poolName ]
no tunnel group-address-pool
Command introduced in JunosE Release 8.2.0.
Configures a group address pool for a data MDT tunnel. The no version deletes the group
address pool.
poolName—Name of the group address pool
IP PIM Data MDT Configuration
Copyright © 2010, Juniper Networks, Inc.