Slot Ignore-Diagnostic-Failure - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

slot ignore-diagnostic-failure

Syntax
Release Information
Description
Options
Mode
1184
[ no ] slot ignore-diagnostic-failure slotNum
Command introduced in JunosE Release 9.3.0.
Enables you to ignore diagnostics test failures on the line module or SRP. The no version
returns you to the default allowing diagnostic test failures to occur.
slotNum—Number of the selected slot in the router; for ERX7xx models, a number in
the range 0–6; for ERX14xx models, a number in the range 0–13; for the ERX310 router,
a number in the range 1–2; for the E120 router, a number in the range 0–5; for the E320
router, a number in the range 0–16
Global Configuration
Copyright © 2010, Juniper Networks, Inc.