Table of Contents
Advertisement
synchronize
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
To force the NVS file system of the redundant SRP module to synchronize with the NVS
file system of the primary SRP module:
synchronize
To force the system to validate all NVS files or only configuration files, and to synchronize
all files that failed the checksum test as well as any other unsynchronized files:
synchronize low-level-check { all | configuration }
Command introduced before JunosE Release 7.1.0.
Forces the NVS file system of the redundant SRP module to synchronize with the NVS
file system of the primary SRP module. Optionally, you can use the low-level-check
keyword to force the system to validate all files or only configuration files in NVS, and to
synchronize all files that failed the checksum validation test during the flash-disk compare
command as well as any other files that are unsynchronized. There is no no version.
all—Validates all files in NVS, and synchronizes all files that failed the checksum test
as well as any other unsynchronized files; this option can take several minutes to
complete
configuration—Validates all configuration files in NVS, and synchronizes all files that
failed the checksum test as well as any other unsynchronized files; this option takes
less time to complete because it validates only a subset of the files in the NVS file
system
Privileged Exec
Chapter 7: S Commands
1255
Advertisement
Table of Contents
