Snmp Trap Link-Status - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

snmp trap link-status

Syntax
Release Information
Description
Mode
1216
[ no ] snmp trap link-status
Command introduced before JunosE Release 7.1.0.
Enables processing of SNMP link status information about an interface. The no version
disables the processing of SNMP link status information.
Controller Configuration, Interface Configuration
Copyright © 2010, Juniper Networks, Inc.