Tunnel-Server - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel-server

Syntax
Release Information
Description
Options
Mode
Related
Documentation
1372
[ no ] tunnel-server interfaceSpecifier
Command introduced before JunosE Release 7.1.0.
Specifies the location of a dedicated or shared tunnel-server port on a module and
accesses Tunnel Server Configuration mode, which enables you to provision the maximum
number of tunnel-service interfaces to be used on the tunnel-server port. The default
version restores the default configuration. On dedicated tunnel-server ports, the default
configuration is the maximum number of tunnel-service interfaces that the tunnel-service
module supports. On shared tunnel-server ports, the default configuration is zero
tunnel-service interfaces provisioned. The no version unprovisions the tunnel-server port
by reducing the number of provisioned tunnel-service interfaces to zero.
interfaceSpecifier—Particular interface; format varies according to interface type; see
"Interface Types and Specifiers" on page 5; port number specified must have the
tunnel-server port assigned to it
Global Configuration
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
Copyright © 2010, Juniper Networks, Inc.