T1 Linecoding - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

t1 lineCoding

Syntax
Release Information
Description
Options
Mode
1266
t1 channel lineCoding { ami | b8zs }
no t1 channel lineCoding
Command introduced before JunosE Release 7.1.0.
Specifies the type of line coding used by a specific T1 channel on a CT3 interface. The no
version restores the default value, b8zs.
NOTE: This command is deprecated and may be removed completely in a
future release. No alternate command exists, because line coding can be
specified only on the bottom layer.
channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
ami—Specifies alternate mark inversion
b8zs—Specifies bipolar with eight-zero substitution
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.