Spf-Interval - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

spf-interval

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
spf-interval [ level-1 | level-2 ] seconds
no spf-interval [ level-1 | level-2 ]
Command introduced before JunosE Release 7.1.0.
Specifies the maximum wait time between two successive IS-IS shortest-path-first
calculations. If you do not specify a level, the interval applies to both level 1 and level 2.
The no version restores the default value, 5 seconds.
level-1—Specifies a level 1 SPF
level-2—Specifies a level 2 SPF
seconds—Maximum time between SPF calculations in the range 0–120 seconds; default
value is 5
Router Configuration
Chapter 7: S Commands
1219