Slot Replace - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

slot replace

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
slot replace slotNum
Command introduced in JunosE Release 9.1.0.
Enables you to replace an ES2 4G LM or an ES2 10G LM with a different type of module
without erasing the interface configuration on the slot. You can use this command to
replace these line modules if they both are paired with the ES2-S1 GE-8 IOA or the ES2-S1
Redund IOA installed. Issue this command after you install the new type of line module
in the slot. There is no no version.
slotNum—Number of the selected slot in the router; for the E120 router, a number in
the range 0–5; for the E320 router, a number in the range 0–5 or 11–16
Global Configuration
Chapter 7: S Commands
1185