Tunnel Sequence-Datagrams - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tunnel sequence-datagrams

Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] tunnel sequence-datagrams
Command introduced before JunosE Release 7.1.0.
IP Tunnel Destination Profile Configuration mode added in JunosE Release 8.2.0.
Enables the use of GRE sequence numbers. The no version disables the use of GRE
sequence numbers.
Global Configuration, IP Tunnel Destination Profile Configuration
Chapter 8: T Commands
1371