Tunnel - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel

Syntax
Release Information
Description
Options
Mode
1342
[ no ] tunnel tag
Command introduced before JunosE Release 7.1.0.
Specifies an L2TP tunnel and changes the mode to Domain Map Tunnel Configuration.
In Domain Map Tunnel Configuration mode, you can set the attributes of the tunnel. The
no version deletes the L2TP tunnel configuration from the router.
From Tunnel Group Configuration mode, adds up to 31 tunnel definitions to the L2TP
tunnel group and changes the mode to Tunnel Group Tunnel Configuration mode. In
Tunnel Group Tunnel Configuration mode, you can set tunnel attributes. The no version
deletes the L2TP tunnel group configuration from the router.
tag—Number in the range 1–31
Domain Map Configuration, Tunnel Group Configuration
Copyright © 2010, Juniper Networks, Inc.