Sscc Protocol Lac - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

sscc protocol lac

Syntax
Release Information
Description
Mode
1226
[ no ] sscc protocol lac
Command introduced in JunosE Release 11.0.0.
Configures the SRC client to support policy and QoS configuration on L2TP interfaces
on a virtual router that functions as an L2TP access concentrator (LAC) on one side of
an L2TP tunnel. The no version disables SRC client support for L2TP LAC interfaces.
NOTE: You must enable the SRC client by using the sscc enable cops-pr
command on the virtual router to be able to configure policy and QoS support
for L2TP LAC interfaces by the COPS messages.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.