Sscc Update-Policy-Request Enable - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

sscc update-policy-request enable

Syntax
Release Information
Description
Mode
Related
Documentation
1232
[ no ] sscc update-policy-request enable
Command introduced in JunosE Release 9.3.0.
Configures the router to collect updated DSL line rate parameters from an access node
using the ANCP topology discovery message and transmit the information to the COPS
server with corresponding COPS messages. If you enable this feature, the access node
sends line rate parameters not only during connection establishment, but also whenever
any of the line rate values changes after the connection is built. The no version restores
the default, which disables line rate parameters to be sent to the COPS server.
NOTE: When you configure the sscc update-policy-request enable command,
a warning message is displayed, prompting you to confirm whether you want
to enable the router that functions as the SRC client to forcibly send updated
line rate information parameters to the COPS server, which is running a release
of SRC software earlier than Release 3.0.0 that is not compatible with the
line rate message format.
Global Configuration
Configuring the SRC Client in the JunosE Broadband Access Configuration Guide
Retrieval of DSL Line Rate Information from Access Nodes Overview
Copyright © 2010, Juniper Networks, Inc.