Subscriber - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

subscriber

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
subscriber { bridgedEthernet | ip } { user | user-prefix } userName
domain domainName [ { password | password-prefix } password ]
[ no-authenticate ]
no subscriber { bridgedEthernet | ip }
Command introduced before JunosE Release 7.1.0.
Configures a local subscriber (when one cannot be obtained externally, as in PPP) on
the E Series router to support authentication and configuration from the RADIUS server.
The no version negates the command.
bridgedEthernet—Specifies bridgedEthernet as the upper interface type
ip—Specifies IP as the upper interface type
user—Employs the username as specified
user-prefix—Appends the interface physical location to the username
userName—RADIUS username
domainName—Domain name
password—Employs the password as specified
password-prefix—Appends the interface physical location to the password
password—RADIUS password
no-authenticate—Disables authentication
Interface Configuration, Subinterface Configuration
Chapter 7: S Commands
1237