Tunnel-Subscriber Authentication - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tunnel-subscriber authentication

Syntax
Release Information
Description
Options
Mode
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
tunnel-subscriber authentication { enable | disable }
no tunnel-subscriber authentication
Command introduced in JunosE Release 9.1.0.
Configures whether tunnel subscribers within the domain map are authenticated with
the authentication server or are granted access without individual authentication. The
no version restores the default condition, where users are not authenticated by an
authentication server.
enable—Enables tunnel subscriber authentication by the authentication server
disable—Disables tunnel subscriber authentication by the authentication server; all
users in the domain are granted access without individual authentication; this is the
default condition
Domain Map Configuration
Configuring Tunnel Subscriber Authentication in the JunosE Broadband Access
Configuration Guide
Chapter 8: T Commands
1377