Summary-Prefix - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

summary-prefix

Syntax
Release Information
Description
Options
Mode
1242
For IS-IS from Address Family Configuration mode:
summary-prefix ipv6Prefix [ level-1 | level-1-2 | level-2 ] [ metricValue ] [ tagValue ]
no summary-prefix ipv6Prefix
For OSPFv3 from Router Configuration mode:
[ no ] summary-prefix ipv6Prefix/ipv6prefixLength
Command introduced before JunosE Release 7.1.0.
IS-IS version added in JunosE Release 8.2.0.
In Address Family configuration mode, aggregates external IPv6 routes at the border of
the IS-IS domain. In Router Configuration mode, aggregates external IPv6 routes at the
border of the OSPFv3 domain. The no version restores the default.
level-1—Specifies the aggregation of IPv6 routes into IS-IS level 1
level-1-2—Specifies the aggregation of IPv6 routes into IS-IS level 1 and level 2
level-2—Specifies the aggregation of IPv6 routes into IS-IS level 2
metricValue—Metric (cost) for the interface to links at the specified level; number in
the range 1–16777215
tagValue—Number in the range 1–4294967295 that identifies the route tag assigned
to the IS-IS interface
ipv6Prefix—IPv6 network number
ipv6PrefixLength—Length of the IPv6 prefix; a decimal value that indicates how many
of the higher-order contiguous bits of the IPv6 address comprise the prefix (the network
portion of the IPv6 address). A slash (/) must precede this value.
Address Family Configuration (IS-IS), Router Configuration (OSPFv3)
Copyright © 2010, Juniper Networks, Inc.