Snmp-Server Trap-Proxy - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

snmp-server trap-proxy

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] snmp-server trap-proxy { enable | disable }
Command introduced before JunosE Release 7.1.0.
Enables or disables the SNMP trap proxy. The no version disables the SNMP trap proxy.
enable—Enables SNMP trap proxy
disable—Disables SNMP trap proxy
Global Configuration
Chapter 7: S Commands
1209