Test Aaa - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

test aaa

Syntax
Release Information
Description
Options
Mode
1298
test aaa { ppp | mlppp } userName [ password ] [ virtual-router vrContext ]
[ aaa-profile profileName ] [ zero-stats ] [ filter ]
Command introduced before JunosE Release 7.1.0.
Verifies RADIUS authentication and accounting and IP (or IPv6) address assignment
setup. The test uses a username and password and attempts to authenticate a user, get
an address assignment, and issue a start accounting request. The test immediately
terminates the session by issuing a stop accounting request and an address release.
Optionally, a virtual router context may be specified. There is no no version.
ppp—Indicates a PPP user
mlppp—Simulates Multilink PPP
userName—Username to test
password—Password to associate with username; the password is optional—when
omitted, the RADIUS access request has no User-Password attribute
vrContext—Virtual router context in which to authenticate the user
profileName—Name of AAA profile for the user
zero-stats—Specifies that accounting statistics should be set to zero for this test
filter—See Filtering show Commands on page 4
Privileged Exec
Copyright © 2010, Juniper Networks, Inc.