T1 Fdl Transmit - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

t1 fdl transmit

Syntax
Release Information
Description
Options
Mode
1264
t1 channel fdl transmit { path-id | idle-signal | test-signal }
no t1 channel fdl transmit [ path-id | idle-signal | test-signal ]
Command introduced before JunosE Release 7.1.0.
Configures the router to send the specified FDL message on a T1 channel on a CT3
interface. The no version stops the router from sending the specified FDL message or all
FDL messages.
channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
path-id—Transmits a path identification message every second; default value is disabled
idle-signal—Transmits an idle signal message every second; default value is disabled
test-signal—Transmits a test signal message every second; default value is disabled
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.