T1 Fdl - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

t1 fdl

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
t1 channel fdl { ansi | att | all | none }
no t1 channel fdl [ ansi | att | all ]
Command introduced before JunosE Release 7.1.0.
Specifies the FDL standard used by a specific T1 channel on the CT3 interface. The no
version restores the default, none.
channel—One or more individual T1 channels, ranges of T1 channels, or combination
of individual channels and ranges, in the range 1–28 (no spaces); for example,
3,7-15,19-13,27
ansi—Specifies ANSI T1.403 Standard for extended superframe FDL exchange support
att—Specifies AT&T Technical Reference 54016 for extended superframe FDL exchange
support
all—Specifies both the AT&T and ANSI mode for extended superframe FDL exchange
support
none—Removes the current FDL mode settings
Controller Configuration
Chapter 8: T Commands
1261