Traceroute - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

traceroute

Syntax
Release Information
Description
Options
1328
traceroute [ vrf vrfName ] destination [ ttl maxTTLCount ]
[ timeout timeOutVal ] [ data-size sizeValue ]
[ source { interface interfaceType interfaceSpecifier | address sourceAddress } ]
[ extended [ tos tosVal ] [ set-dont-fragment-bit ] [ interface iType iNumber ]
traceroute ipv6 [ vrf vrfName ] destination [ hop-limit hopLimit ]
[ timeout timeOutVal ][ data-size sizeValue ] [ source { interface interfaceType
interfaceSpecifier |
address sourceAddress } ] [ extended [ dscp trafficClass ] [ flow-label flowLabel ] ]
Command introduced before JunosE Release 7.1.0.
vrf keyword and vrfName variable added to IPv6 version in JunosE Release 7.2.0.
Discovers the paths that router packets follow when traveling to their destinations. There
is no no version.
vrfName—Name of the VRF context; string of 1–32 alphanumeric characters
ipv6—Specifies the destination address as IPv6 format
destination—IP address, IPv6 address, or domain name of the trace
hopLimit—Maximum number of hops of the trace in the range 1–255; default value is
32
maxTTLCount—Maximum number of hops of the trace in the range 1–255; default
value is 32
timeOutVal—Time in seconds to wait for trace responses in the range 1–20; default
value is 2
sizeValue—Number of bytes comprising the IP packet and reflected in the IP header in
the range 0–64000
source interface—Specifies an interface as the source for the transmitted packets
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type;
see Interface Types and Specifiers on page 5
source address—Specifies an IP address as source for the transmitted packets
sourceAddress—IP address or domain name used as the source address
extended—Specifies extended IP header attributes
tosVal—Value of the ToS byte
set-dont-fragment-bit—Specifies the don't-fragment bit
iType—Interface type
iNumber—Interface location
Copyright © 2010, Juniper Networks, Inc.