Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual page 1238

JunosE 11.3.x Command Reference Guide N to Z
Mode
Related
Documentation
1196
timeOutValue—Ping timeout in minutes, in the range 1–90; default value is 1
trapQueue—Configures the SNMP trap queue for traps sent to this host
queueDrainRate—Maximum number of traps per second to be sent to the host, in the
range 0–2147483647; default value is 0
queueFull—Method used to drop traps when the trap queue is full
dropFirstIn—Drops the oldest trap in the queue
dropLastIn—Drops the most recent trap added to the queue
queueSize—Maximum number of traps to be kept in the trap queue, in the range
32–214748364; default value is 32
Global Configuration
Monitoring SNMP Secure Packet Mirroring Traps
Copyright © 2010, Juniper Networks, Inc.