Sscc Restart - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

sscc restart

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
sscc restart [ clean-state ]
Command introduced in JunosE Release 11.0.0.
Forces the router to restart a COPS connection to, and resynchronize with, the SRC
software, without removing the SRC client. The no sscc enable cops command removes
the SRC client. There is no no version.
clean-state—Enables a complex restart where the SRC client closes the connection
and clears the Policy Information Base (PIB) structures and tables. Then the SRC client
connects to the SRC software, which requests full synchronization, which restores
correct policy and QoS provisioning.
Privileged Exec
Chapter 7: S Commands
1227