Tunnel Source - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

tunnel source

Syntax
Release Information
Description
Options
Mode
1376
For DVMRP and GRE tunnels in Interface Configuration mode:
tunnel source { ipAddress | interfaceType interfaceSpecifier }
no tunnel source
For IPSec tunnels in Interface Configuration mode:
tunnel source { ipAddress | identity fqdn }
no tunnel source
For DVMRP and GRE tunnels in IP PIM Data MDT Configuration mode and in IP Tunnel
Destination Profile Configuration mode:
[ no ] tunnel source ipAddress
Command introduced before JunosE Release 7.1.0.
IP PIM Data MDT Profile Configuration mode, and IP Tunnel Destination Profile
Configuration mode added in JunosE Release 8.2.0.
In Interface Configuration mode, configures the source for a DVMRP, GRE, or IPSec tunnel.
The no version deletes the tunnel source.
In IP Tunnel Destination Profile Configuration mode, configures the source in the
destination profile for dynamic IP tunnels. The no version deletes the tunnel source.
In IP PIM Data MDT Configuration mode, configures the source in the IP PIM Data MT
profile for multicast VPNs. The no version deletes the tunnel source.
ipAddress—IP address of an existing interface that will serve as the tunnel's source
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
fqdn—Fully qualified domain name of the interface to serve as the tunnel's source; a
maximum of 80 characters
Interface Configuration, IP PIM Data MDT Configuration, IP Tunnel Destination Profile
Configuration
Copyright © 2010, Juniper Networks, Inc.