Tacacs-Server Timeout - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

tacacs-server timeout

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
tacacs-server timeout timeoutValue
no tacacs-server timeout
Command introduced before JunosE Release 7.1.0.
Sets the interval in seconds that the server waits for the TACACS+ server host to reply.
This value is shared by those TACACS+ servers that do not have a timeout interval set
by the tacacs-server host command. The no version resets the timeout interval shared
by all TACACS+ servers.
timeoutValue—Response timeout interval for the TACACS+ client to server exchange;
number in the range 1–255; default value is 5
Global Configuration
Chapter 8: T Commands
1277