Suspicious-Control-Flow-Detection Protocol Threshold - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 Command Reference Manual

JunosE 11.3.x Command Reference Guide N to Z

suspicious-control-flow-detection protocol threshold

Syntax
Release Information
Description
Options
Mode
1248
suspicious-control-flow-detection protocol protocolValue threshold thresholdValue
no suspicious-control-flow-detection protocol protocolValue threshold
Command introduced in JunosE Release 7.3.0.
Sets a threshold rate at which a flow becomes suspicious for a specific protocol. The no
version restores the default for a protocol, which is a protocol-dependent numeric value.
protocolValue—Name of the protocol
thresholdValue—Zero or a number in the range 3–65535; when set to zero, no flows
for the protocol type are considered suspicious
Global Configuration
Copyright © 2010, Juniper Networks, Inc.