Table of Contents
Advertisement
JunosE 11.3.x Command Reference Guide N to Z
show vlan bulk-config
Syntax
Release Information
Description
Options
Mode
1172
show vlan bulk-config [ { interfaceType } interfaceSpecifier ]
[ name bulkConfigName ] [ filter ]
Command introduced in JunosE Release 7.3.0.
Displays information, including base profile assignments, for the bulk-configured VLAN
ranges on a VLAN subinterface. You can display information for all VLAN ranges on the
router, for all VLAN ranges on a particular VLAN subinterface, or for the VLAN range
associated with a particular bulk configuration name.
interfaceType—One of the following interface types listed in "Interface Types and
Specifiers" on page 5:
fastEthernet
gigabitEthernet
tenGigabitEthernet
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
bulkConfigName—Name associated with a VLAN range, as specified in the vlan
bulk-config command
filter—See Filtering show Commands on page 4
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - COMMAND REFERENCE N TO Z 2010-10-19 and is the answer not in the manual?
Questions and answers